Power Vented Outdoor Duct Furnace

The Modine weatherproof duct furnace with blower, cooling, and/or downturn plenum sections was designed for use with a building’s heating, heating/ventilating/cooling and make-up air systems.

Direct Indoor/Outdoor MUA (MDB/MRB)

Direct Indoor/Outdoor MUA (MDB/MRB)

Designed to provide an economical and efficient means of supplying tempered make-up air, our direct-fired, make-up air units are available in eight airflow configurations.

Explosion Proof Electric Heater (HEX)

Explosion Proof Electric Heater (HEX)

Modine’s HEX electric unit heaters are designed for hazardous industrial locations where potential for explosion exists due to the presence of flammable gases, vapors, powdered-metals or dusts.

WeatherHawk Indirect Outdoor MUA (H-Series)

WeatherHawk Indirect Outdoor MUA (H-Series)

WeatherHawk indirect outdoor make-up air systems are designed and engineered to deliver superior performance in a variety of applications.

Power Throw Electric Heater (PT)

Power Throw Electric Heater (PT)

Where there is a requirement for air velocity and heat throw greater than can be provided by horizontal delivery models, Power Throw (PTE) unit heaters should be considered.

Indirect Indoor Gravity MUA (DBG)

Indirect Indoor Gravity MUA (DBG)

The indoor gravity vented duct furnace with blower and/or cooler sections was designed for use with a building’s heating, heating/ventilation/cooling make-up air systems.

Convectors

Convectors

The heating elements of Modine’s convectors can be used for hot water or steam. The standard header is copper with top and bottom tappings.

Horizontal Electric Heater (HER)

Horizontal Electric Heater (HER)

Modine electric unit heaters provide a wide variety of options in solving comfort-heating problems. Each is designed for long heat-throw, uniform heat-delivery and reduced maintenance.

Indirect Indoor Separated Combustion MUA (DBS/DCS)

Indirect Indoor Separated Combustion MUA (DBS/DCS)

The Modine indoor separated combustion duct furnace with blower and/or cooling sections was designed for use with a building’s heating, heating/ventilating/cooling and make-up air systems.

Cabinet Unit Heaters

Cabinet Unit Heaters

Modine cabinet unit heaters effectively make each area served an independent heating zone.

Vertical Electric Heater (V/VN)

Vertical Electric Heater (V/VN)

Modine electric unit heaters provide a wide variety of options in solving comfort-heating problems. Each is designed for long heat-throw, uniform heat-delivery and reduced maintenance.

Fin Tube Radiation

Fin Tube Radiation

Fin tube radiation heaters from Modine are designed with a variety of enclosure styles to meet most any application or architectural style.

Horizontal Hydronic (HS/HC)

Horizontal Hydronic (HS/HC)

Available with top/bottom (Model HS) or side (Model HC) inlet/outlet piping, Modine horizontal steam/hot water unit heaters install quickly, easily and at low cost because they are lightweight.

Vertical Power Vented (PDP/BDP)

Vertical Power Vented (PDP/BDP)

Inexpensive to install, easy to use and time tested for quality and durability. Our commercial grade power vent unit heaters come with either a propeller fan or centrifugal blower fan in seven different sizes.

Power Throw Hydronic (PT)

Power Throw Hydronic (PT)

Power-Throw™ horizontal delivery unit heaters are ideal for heating large buildings where a number of smaller units can be replaced by a few larger Power-Throw™ units.

Separated Combustion (PTS/BTS)

Separated Combustion (PTS/BTS)

Separated combustion unit heaters obtain 100% of their combustion air from outside, ensuring that nothing but clean, fresh air is burned in the combustion chamber.

Outdoor Duct Furnace

Outdoor Duct Furnace

The Modine WeatherHawk® weatherproof duct furnace was designed for use with a building’s heating, heating/cooling and make-up air systems.

Effinity™ (PTC/BTC)

Effinity™ (PTC/BTC)

Modine’s Effinity™ unit heater line is the most efficient gas-fired, condensing unit heater in North America.

Indoor Separated Combustion

Indoor Separated Combustion

The Modine indoor separated combustion duct furnace was designed for use with a building’s heating, heating/cooling and make-up air systems.

Low Intensity

Low Intensity

Modine’s single-burner positive pressure infrared heater is approved for vented or unvented commercial and industrial applications.

More details

High Intensity

High Intensity

Modine’s high intensity ceramic infrared heater is approved for indoor unvented installation. It does not utilize a fan, thus eliminating noise and draft distractions.